EPOXY COAL TAR

EPOXY COAL TAR This paint is a tow pack polyamid cured, coaltar, epoxy with very good resistance to water . can be used both above & below water.

Technical Data :

Coluor/texture : black glossy
Solid (by wight) : 75% - 7%
Density : A : 1.6 gr/cm3 B : 0.94 gr/cm3
Viscosity (cup No:4) din5321 I : A :80 krebs B : 165"
Pot life : 12 hours

Recommendation for Use :

Film thikness, dry : 50 - 60 mic (one coate)
Application methods : Air less spray Brush - conventional spray
Coverage : 12.5 sq.m/ltr
Thinner/cleaner : so - 10000

Drying lime (guiding data at 23c - 25c) :

Dry to touch : 6 hours(max)
Recoat : min 12 hours
Fullycurcd, max : 7days
Surfasc preparation: clean , dry & blast cleaned surface to min sa21/4
Mixing ratio : 5.7:1 (w) or 3 parts of component
A(basc) to bethoroughly mixed with I part of component B (hardner) half an hour prior to application. Conditions During Application :
The temperature of the substrate should be minl3c as curing process at lower temperatures will be considerably retarded. This paint shoud not be exposed to chemical or cchanicals stress unit the is fully cured.